Introducing H-B03, the perfect ultrasonic cutter for the perfect cutting job. With the 10-70μm oscillation amplitude and 40,000 vibrations per second (40 kHz) high frequency, H-B03 can effectively activate the molecular energy in the object and break up the molecular chains to cut through objects with ease. The rapid vibration can dramatically reduce the friction coefficient between the object and the blade, leading to an ultra-smooth cutting line.

H-B03’s ground-breaking ultrasonic technology completely solves the white stress mark issues when removing nub marks. It can easily tackle a variety of materials, especially 3D printed parts. The 3D printed parts and their supports can be easily separated without introducing stress or damaging the integrity of the part.

Traditional cutting requires a sharp blade to press against the material. When the pressure of the blade exceeds the shear strength of the material, the molecules chains at the cutting edge are forced to be torn apart.

H-B03 ultrasonic cutter uses an ultrasonic generator to convert the 50/60Hz input current to a 30/40kHz electric energy. The high frequency electric energy will then be converted to a mechanical oscillation with the same frequency. An ingenious amplitude modulator delivers this mind-boggling high frequency vibration through the cutting blade to the cutting area. The vibration energy can effectively activate the molecular energy in the object and break up the molecular chains to cut through objects with ease.

H-B03 ultrasonic cutter produces a mind-boggling 40,000 vibrations per second, dramatically reduces the friction coefficient between the object and the blade, leading to an ultra-smooth cutting line.

The high frequency vibration can heat up the cutting edge, allowing the cutting edge to be sealed. This can effectively prevent the edges from being falling apart.

All other ultrasonic cutters on the market use a push button on the handpiece to control the cutter. This requires you to always press down the button during the cutting operation, which hinders the flexibility of your hand control. We completely replace the push button with a pedal switch. This allows you to cut materials with a level of precision, ease, and accuracy that was never possible before.

There are two different output power modes to choose from: high setting and low setting. The 25W high power output allows you to cut through carbon fiber tubes like butter.

The low setting mode is designed specifically for cutting models and figures. It is thus be dubbed the “Model Enthusiast” mode. The nub mark removal has always been a headache for Gundam model enthusiasts. White stress marks usually show up on the surface of the models where the nub marks have been cut with a utility knife or nipper. Our ground-breaking “Model Enthusiast” mode completely gets rid of the white stress marks while delivering the perfect and smooth model edges.

The high setting mode is designed to cut through 3D printed or high-strength carbon fiber parts. The high setting mode offers a variety of cutting approaches that are suitable for different cutting applications.

H-B03 ultrasonic cutter adopts an amazing high frequency ultrasonic vibration technology, allowing you to easily cut through a variety of materials such as hardened resin, plastic, circuit board, and 3D printed parts.

Muscle fatigue is the most common complaints for repetitive tasks involving electric tools. We have dedicated our research and design sources to create the best handpiece shape that fits perfectly in your hand and reduces your muscle fatigue. The handpiece features an ergonomic design with a thickness of only 20mm, which offers you the best handling comfort and control experience.

H-B03 ultrasonic cutter features a suction cooling system that sucks the heat from the blade and dissipate it out from the top of the handpiece. This unique design maximizes the cooling at the blade, which gives the user extra time to tackle intricate cutting tasks.

Ultrasonic cutters made by Japanese and Korean companies normally have a continuous working time of only 15-20 mins. It has been tested that H-B03 can work continuously for over 60 mins for the low setting mode and over 30 mins for the high setting mode. The extra-long continuous working time is especially beneficial for the tool capability and maneuverability.

The detachable design of the handpiece allows you to store the handpiece in its designated slot on the base, which dramatically reduces the risk of accidental injuries from the blade.

The high frequency vibration can generate a significant amount of heat on the blade, reducing the working efficiency of the cutter. We adopt an innovative blade clamping technology that significantly reduces the heat generation on the blade by 70%, which greatly extends the lifetime of the blade.

The 0.4mm thick blade is made from tough and wear-resistant metal alloy, which extends the lifetime of the blade and significantly cuts the cost. Users can easily replace the blades in a matter of seconds.

H-B03’s main unit weighs only 437g, and the handpiece weighs only 75g. This ultrasonic cutter is ready to plug in and play out of the box. It is lightweight, compact, and easy to use. You can store it at home or carry it to go without any hassles.