$1,335,335 raised out of $10,000
Overview
Platform
Indiegogo
Backers
2
Start date
Oct 27, 2022
Close date
Oct 28, 2022
Concept

Travel Size | 0-15 PSI | Pump Time Cut by 50% | Inflator For All Kites /Paddle Boards/ Car Tire

Story

COR Pump – The Portable One-click Inflator for Kite Surfers & Paddle Board Riders features sophisticated air inflation, pressure processing, and hardware, as well as a set of ground-breaking technology. Weight 350g & 0-15 PSI. Much more power. In much less size.

 

| COR Pump is used for… 

 

 
 

A magical new way to interact with the pump.  One-button inflation. Always at the ready. Compact gear helps you get around easier too. You can swiftly and conveniently inflate your kite with the COR Pump and your eyes on the surrounding area. Kite inflation is made genuinely simple by COR Pump.

 

| Go ride, stay light… 

Your kite surfing baggage should be lighter. COR Pump is lighter than a bottle of water at approximately 350g(12.3oz). You may place it in your pocket or backpack thanks to its convenient size when not in use. It is your favorite kitesurfing companion.

 

| Say Goodbye to your manual pump 

 

| See what testers say

“I’d really really recommend this. I will definitely buy be buying it myself”

 

“Smart, safe, in control. It is currently the most useful gadget on the kite surfing market for me.”

 

“It is extremely lite and powerful compared to the manual hands pump, which is suitable for wind chasers.”

Actually, the COR Pump is supported by all your inflatable products. With the different adapter, you only need to connect to the universal hose and here you go to inflate your product.

 

| For wing inflation  

| For inflatable paddle board 

| For kite inflation

With its small size, the COR Pump can quickly achieve 400L/min of inflation airflow and up to 15 psi (105 kpa) of inflation pressure by utilizing the innovative Air Booster technology for improved construction and air ducts.

 

 

COR Pump is a perfect Christmas gift for your kitegirl friend.

It’s simple: pack your COR Pump and get going. It’s straightforward to use, like your buddy, even on a solitary adventure. You receive pressure messages from COR on your battery level, pumping success, when the psi range is exceeded, kite air leak issues, and more.

| Rock the beach with COR Pump

COR means Crazy Ocean Rider. Take COR Pump with your next ride. Enjoy the big air and ocean on your every kite trip.

 

| COR Pump’s community

Kiters who see the COR Pump for the first time are always surprised, and some riders even commented “I have been waiting for such a product for 10 years”. 

 

The nozzle kit of COR Pump has 6 kinds of different adapters that supporting with all kitesurfing, wing-surfing, and paddle board brands.

The COR pump is reusable and carries a 4800 mAh rechargeable lithium polymer battery. One charging covers the inflation of 15 x 9m kite, 8 x 15m kite, 12 x 12m kite, 18 x 6m wing kite, 8 x regular paddle board, 12 regular-size paddle board, and 80 swim ring. For the pro version (12000mAh), one charging covers the inflation of 8 x car tire, 20 x paddle board, and 20 x 12 meter kite. 

Fully charged with a type-c in 60 mins and a long work battery life of 2 hours.  When you need to charge your mobile devices anywhere, COR Pump can also be used as a power bank. 

| Portable mini size 

Say hello to the COR Pump. It is smaller than all-electric kite pumps on the market. Some traditional electronic pumps even should plug into the car when doing inflation. It will not collect dust somewhere in your apartment if you have a COR Pump.

| Multiple usages

COR Pump can start a fire by pumping air and giving oxygen more quickly and safely. One of the 2019 RedBulls challengers says this gear will be useful for Snow-kitting players!

The COR Pump Pro could be used as your car tire inflator anywhere. No more plug on your car power. Truly a cordless pump.

 

 | Easy to carry

COR Pump’s working temperature range is -30 degrees to 50 degrees, and it has sand-proof and IP55 waterproof. Pay attention, please do not continue to soak in water or use it too close to the fire.

The COR series all use dual-engine motorization. One engine is responsible for rapid inflation at 0 pressure and a high-speed motor with 15 blades, greatly improves the speed of early inflation. When the detection reaches 3psi, the second supercharged engine is automatically activated, which greatly improves the To reduce the power consumption of inflation

The pressure protection system of the COR Pump carries a maximum pressure of 15 PSI. One-click start inflating and one-click stop. COR Pump is friendly both for the beginner or big air rider, you can be confident to do kite inflation to a 6.5 PSI automatically and customize the most suitable psi for your ride with a simple button-click.

There isn’t an ideal pressure that I could suggest to you. You must realize that your kite occasionally requires adjustment, much as how the pressure in your car’s tires is altered according to the load factor. We have the following factors that need to be taken into account: Weight, kite size, and application range of the rider (wave, freestyle, school, etc.), and both the local environment and the wind conditions. I can only advise that you give it a try. Fly your kite at a pressure of 4 PSI, then raise it to 7-8 PSI. Your kite’s complete flight qualities will alter, as you’ll see.

The strong air pumping brings a high amount of heat. COR Pump has installed a polymer breathable waterproof membrane on the inside of the heat dissipation hole, which can quickly dissipate heat and avoid water/sand entry as well.

COR Pump Pro is equipped with a preset air pressure system, which can accurately inflate according to the input specified air pressure, which is safer and faster, and more convenient, Many kiters suggested us to upgrade the booster pump to the tire air pump specification, yes, we did it, now the maximum pressure of COR Pump Pro can reach 150psi, no longer worry about the tire when you drive to the beach pissed

 

 | Air pressure preset demonstration 

 | COR Pump Pro inflates the paddle board 

|COR Pump & COR Pump Pro

The COR Pump Pro version can reach 150 psi and with a longer battery working time. Pro could support all inflatable paddles, water sports products, outdoor air mattresses, and car tires.

The triangle is the most stable structure we knew, we hope COR Pump Pro can be very strong and durable while having strong performance.  

We put so much thought and love into each pump design – we sweat the small staff. After all, the devil is in the details!

It took two years to make and optimize the prototype, after repeated tests, the air pump specially made for kitesurfing players and other water sports has finally been made on the market.

Timeline

 

Make your kitesurfing trip smart and save our world’s oceans, sea creatures, reefs, and endangered species. “Earth is now our only shareholder. ” Salute!

 

Risks and challenges

The team behind COR has decades of experience and has brought complex products to market for some of the best-known global brands. We are working closely with a tier-one manufacturing partner (chances are you are reading this on a device manufactured by them). We have direct relationships with our major component suppliers and we have secured production quantities of long-lead parts. We have spent over three years developing COR and we have completed two pre-production manufacturing runs and extensive testing and pre-certification. We’re not raising funds through Kickstarter to learn or to put together a team. We are launching on Kickstarter to build the COR community and together with our early backers, bring the best feedback and ideas to COR. We are building a product that matters to people who care. But delays may happen and unexpected events may affect our timeline. We promise to be open, transparent, and responsive to you, the COR community. To us, the single most important consideration will always be delivering a fantastic product and we will always prioritize quality over schedule. If you have any questions, concerns, or feedback, or simply want to drop us a line, you can reach us at yescorpump@hotmail.com

Country
Links